Premium privacy fencing installed straight and clean, with consistent slat spacing and a tidy finish.
At a glance:
Free on-site measure and quote after an on-site inspection.
A slat fence can look high-end, or it can look like a DIY kit that never quite lined up. The difference is in the install details.
Your eye naturally tracks the long horizontal lines. We measure and set out carefully to ensure consistent spacing, completely avoiding the common "wavy" look.
Every install is a precision job. You get a sharp finish from both sides with neat end caps, tidy corner returns, and seamless gate integration.
The fastest next step is a site visit and a proper measure.
These recent installs show what expert installation looks like, clean lines, consistent spacing, and a premium finish from both sides.
Custom designed for residential street fronts.
Modern Melbourne façades show every detail, especially on front fence installation where the fence becomes part of the architecture. That's why we plan corners, returns, and transitions so the finish looks intentional, not patched together.
"Design-wise, aluminium slats can be tuned to suit contemporary builds, Hamptons style fences and minimal exteriors."
The key is matching slat spacing and colour so the fence fits the home's lines and street presence perfectly.
Aluminium slats are unforgiving, small mistakes show across the whole run. With 40+ years of hands-on experience and Melbourne's South East as our core service area, we're used to the site conditions that affect fence lines, slopes, and tight access on real Melbourne blocks.
If you're weighing up options, we can talk you through what suits your block. You can also check out:
We set out carefully so spacing stays consistent over long boundaries, no drifting gaps, no "wavy" look.
Posts are installed for strength and wind resistance, reducing movement and long-term sag, especially around gates.
Corners and ends are finished properly with tidy returns and end caps where applicable, so the fence starts and stops cleanly.
We plan matching aluminium gates early so access points sit square and keep the same visual rhythm.
From fence replacement to new colorbond fencing, we're proud of the repeat work and word-of-mouth that comes from consistent quality and customer satisfaction.
Ben and Matt put in over 150m of colorbond fencing at my property in Emerald VIC, they perfectly matched it with the uneven land and did an amazing job, highly recommend there services!
Just had a colourbond fence supplied and fitted by the Team at Visser fencing contractors, l couldnt of asked for more of a professional and conscientious approach with a Job perfectly well done. Thank you
Had our old wooden gates replaced with colourbond. They look great. Ben from Visser was awesome and kept me updated as he was doing it. Thanks Ben. 😊
I have used this company for the last 8 years for various colorbond jobs, always receive excellent service. Today Ben showed up and explained why I couldn't have my gates exactly as I wanted and came up with a solution which was perfect. All staff are fantastic and I will definitely use them again for future jobs
Would highly recommend Visser for any fencing you require, have used them twice in the last few years and cannot fault them, Ben was just here to do a colour bond fence and they did a fantastic job and left our place with no rubbish, what a great company from start to finish.
Thanks to Visser Fencing and Ben & Adam for the install. Again a job well done and this the second time I have had my fencing done by Visser. 15 years ago when Kim did the fencing on my new House and today with the next generation installing fence extensions to the original fences, whilst working around a construction site that is my back yard.
We service the South Eastern Suburbs and surrounding Melbourne areas for fence extensions, upgrades, fence replacement, and new boundary fencing.
Common Service Areas:
Not sure if we service your suburb? Call to confirm, or book a free measure.
Slat style fencing modernises a frontage, boosts privacy and security, but only when the install is precise. Book a free on-site measure across Melbourne's South East and we'll map out the cleanest design for your home and budget.
Most "cheap-looking" slat fences are caused by poor planning. We focus on the structural details so your fence looks premium and stays straight.
We lock in consistent spacing from the start, ensuring a perfectly straight line through every join.
We plan seamless corners and returns so your fence wraps neatly with a clean, flush top line.
We build with heavy-duty posts and correct footings so your fence stands strong without flexing.
We design gates to sit square, swing cleanly, and perfectly match your fence's visual rhythm.
A clean steel upgrade also prevents the "patchwork" look from repeated repairs. With consistent fence panels, posts, and rails, the boundary looks intentional again.
Control sightlines while maintaining airflow. We'll help you choose the right spacing to improve curb appeal without making your property feel closed in.
Visser Fencing supplies and installs aluminium slat fencing with a focus on straight runs, strong posts, and tidy finishing. The approach is simple: measure carefully, set out the line properly, and install so the fence looks "built-in" to the property.
You can choose custom designed horizontal slats, depending on the look you want and how you want the home's lines to read. We also build Slat Fencing & Gates as a matched set, so the gate does not interrupt the design.
Matching pedestrian and driveway gates designed to keep slat spacing and finish consistent with your fence.
A sharper, more architectural gate profile when you want a bolder entry statement.
A strong choice for modern street fronts and longer boundaries. Horizontal slats emphasise width and clean geometry, and they make spacing consistency especially important.
Most systems are powder coated for a clean, low-maintenance finish. We'll guide powder coated colours and colour options to suit brickwork, render, trims, and garage doors.
If you like timber warmth without the upkeep of timber fencing, wood grain looks are a popular option. Quality finishes are rust-resistant, typically fade-resistant, and built to stay looking tidy over time.
Surfmist®
Shale Grey®
Dune®
Note: On-screen colours may vary. We'll show you physical swatches during your measure and quote.
For residential fencing, aluminium slats are a smart upgrade when you want a modern fence without weekend maintenance. They're durable, low maintenance, and hold their look with minimal effort.
They're also a strong option for fence replacement. Replacing rotting timber or worn boundaries can lift curb appeal quickly and support perceived property value when the home looks well cared for.
Aluminium slat fencing and screening suits front fence installation, side fences, courtyards, and pool fencing where safety and access matter, and we can keep the look consistent across Melbourne's South East, including matching gates.
If your current fence has loose panels, wobbly posts, or rotting timber, a full replacement is often the cleaner long-term fix compared to ongoing patch jobs.
A premium fence comes down to clear planning and a precise install.
We complete an on-site inspection, measure the run, check levels/slopes, corners and returns, and review access.
A short consultation confirms privacy needs, height, slat spacing, and gate needs.
You receive a written quote covering scope, finish, timeline, and any customisation choices.
We install for straight runs, consistent slat spacing, clean corners, then complete tidy clean-up and final check.
Every custom aluminium slat fence we install across Melbourne's South East is backed by our comprehensive 10-Year Structural Warranty, ensuring long-lasting durability.
Pricing depends on fence length, height, spacing, site access, and whether you need gates or corner returns. The fastest way to get an accurate figure is a free on-site measure and quote with a clear written scope.
Pricing depends on fence length, height, spacing, site access, and whether you need gates or corner returns. The fastest way to get an accurate figure is a free on-site measure and quote with a clear written scope.
Yes, we install Slat Fencing & Gates as a matched set so the gate keeps the same lines and spacing. That includes both a pedestrian gate and a driveway gate, depending on your access needs.
Aluminium is rust-resistant, and a quality powder coated finish is designed to be fade-resistant under normal conditions. Basic washing helps keep it looking clean, especially near busy roads or coastal air.
Yes. Security depends on height, spacing, fixing method, and gate hardware. We'll recommend a layout that balances privacy with strength, and we'll plan posts and frames for stability.
It depends on sightlines and where the fence sits (front, side, courtyard). We'll guide spacing and height during the on-site inspection so you get privacy without making the frontage feel closed-in.
Yes. We plan the set-out to handle slope and transitions cleanly, so the fence line stays straight and the finish doesn't look stepped or patched.
Yes. For many properties it's the fence of choice around swimming pools, especially when you want modern screening while still planning for pool safety and compliant access. We'll advise on layout during the on-site inspection.
Yes. Aluminium slats can work really well with Hamptons designs when the layout is planned to match the home's lines. We'll usually recommend subtly spaced horizontal slats, a clean top line, and a light or neutral powder coated colour that complements white trim, render, and coastal-style finishes. During the on-site inspection, we'll confirm the best spacing and colour so the fence looks like part of the architecture, not an add-on.
Yes. We can match slat gates to your fence, including sliding gate, double gate and swing gate options, and we plan gate integration early so alignment and spacing stay consistent.
Tell us a few details and we’ll confirm availability and next steps across the South Eastern Suburbs, usually within 1 business day.
Or call us on
"*" indicates required fields
